LFT

Pulley kit for installation to the ceiling – It is suggested to lift Foggy when installed between ceiling and countertop

C8

– Zones: 8 configurable as NC, NO – 1 Resistor, 2 Resistors, switch alarms, inertial detectors – any input can be switched as an output – Bus connection: RS485 – Supply voltage: 13.8 Vdc 38 mA – Dimensions (LxH): 80×55 mm – Compatibility: ULTRA/CAPTURE/RAPTOR CERTIFICATION: IMQ-INCERT EN 50131 GRADE 2

LBL

Adhesive label to stick near the protected area to show and warn about lack of visibility caused by the activation of the system

PRL10

10 cm nozzle extension. Recommended for installation between ceiling and countertop.

ER360

It makes three single jets with 60° inclination. Recommended for wall installations.

ER160

It makes a single jet with 60° inclination. Recommended for ceiling installations.

RIC10

Tank recharge service with 1 liter of fogging liquid. Memory reset of liquid level.

ER390

It makes three single jets with 90° inclination. Recommended for ceiling installations.

SPECTRUM PA WALL AM

– Detection through double side (right+left) double PIR – Detection range from 3 to 12 meters per side – Antimasking with active IR (left+right) – Tamper through accelerometer – Light filter – Digital temperature compensation – Detection angle up to 10° – Installation height 1,2 meters – PET Immunity – Block input for alarm relay […]

OUTSPIDER DT

– Dual passive infrared + dual MW channel – Range from 15 to 23 m – Coverage from 5° to 90° m (optional lens included) – ANTI-MASKING function with ACTIVE INFRARED – PET Immunity – Frequency: 10,525 GHz – Consumption : 65-77 mA – Power supply: 13.8 Vdc – Protection tamper against cover opening – […]